Nameplate Engraving

I.D. Plates, Tags, Labels

L.E.E. Engraving will customize your nameplates. Your nameplates can be made of Aluminum, Brass, Flexible Plastics, Phenolic or Stainless Steel.

In plastic we carry a variety of materials in many colors, finishes and sizes. You are not limited to a standard size nameplate such as a 1 x 3″. L.E.E. Engraving does not use precut plates. Each plate is made per your specifications, up to 24 x 48″. You have a choice between square or rounded corners, holes or an aggressive 3M-quality adhesive. You also may request specially shaped plates for the individual needs of your firm.

Below are some of the materials we use:

• Textured finish flexible plastic is a modified acrylic plastic, which is UV stable and suitable for use outdoors.
  We normally recommend the above material because it has a non-glare finish and does not easily scratch or show fingerprints. Textured finish can be cleaned with soap and water. The textured material softens at about 200 degrees F.
• Matte material has a dull, smooth finish, which is non-glare. It is very flexible and is recommended for very fine detail engraving. Matte finished material come in both indoor and outdoor varieties.
• Satin finish plastic has been around the longest. It is a flexible plastic with a shiny, brushed look finish. While the satin material is good for most normal applications, and is available is a wide spectrum of colors and thickness, it is not UV stable and will fade over time.
• Phenolic (micarta) is a hard, brittle 3-ply material normally used in high heat areas. It is not recommended for exposure to temperatures above 260C/500F for prolonged periods of time.
• Reverse engraved materials come in a variety of colors with the surface being smooth since all engraving and character colors are done on the back. It is often used for architectural signage and is available in a clear glossy surface or a matte finish.

Toll-Free
1-800-326-6730